{"product_id":"whisperkool-mini-blow-through-omega-110v-he-split-wine-cellar-cooling-system","title":"WhisperKOOL Mini Blow-Through OMEGA 110V H.E. Split Wine Cellar Cooling System – S-WKBT-MINI-OMEGA","description":"\u003csection class=\"wce-product-page\"\u003e\u003cheader class=\"wce-product-header\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eWhisperKOOL Split Wine Cellar Cooling System\u003c\/span\u003e\n\u003ch2\u003eWhisperKOOL Mini Blow-Through OMEGA 110V H.E. Split Wine Cellar Cooling System – S-WKBT-MINI-OMEGA\u003c\/h2\u003e\n\u003cp class=\"wce-product-intro\"\u003eThe \u003cstrong\u003eWhisperKOOL Mini Blow-Through OMEGA 110V H.E. Split Wine Cellar Cooling System\u003c\/strong\u003e is a compact, professionally installed split system engineered for concealed wine cellar cooling. It is designed for applications where the evaporator must remain discreetly integrated into a soffit, wine wall, custom cabinet, ceiling cavity, attic, or adjacent mechanical space.\u003c\/p\u003e\n\u003cp\u003eThe system supports \u003cstrong\u003educted, ductless, and hybrid airflow configurations\u003c\/strong\u003e, allowing the installer to direct supply and return air according to the cellar layout. Its compact evaporator, built-in condensate management, two-speed airflow control, remote KDT display, bottle probe, and dual-side service access make it well suited for modern residential and commercial wine cellar projects.\u003c\/p\u003e\n\u003cdiv class=\"wce-stats\"\u003e\n\u003cdiv class=\"wce-stat\"\u003e\n\u003cdiv class=\"wce-stat-num\"\u003e500\u003c\/div\u003e\n\u003cdiv class=\"wce-stat-lab\"\u003eApproximate cu. ft.\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-stat\"\u003e\n\u003cdiv class=\"wce-stat-num\"\u003e110V\u003c\/div\u003e\n\u003cdiv class=\"wce-stat-lab\"\u003eOMEGA H.E. condenser\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-stat\"\u003e\n\u003cdiv class=\"wce-stat-num\"\u003e3\u003c\/div\u003e\n\u003cdiv class=\"wce-stat-lab\"\u003eAirflow configurations\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-stat\"\u003e\n\u003cdiv class=\"wce-stat-num\"\u003e100 FT.\u003c\/div\u003e\n\u003cdiv class=\"wce-stat-lab\"\u003eMaximum line-set distance\u003c\/div\u003e\n\u003c\/div\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003eImportant:\u003c\/strong\u003e One compatible airflow configuration kit must be selected for the evaporator. This is a split refrigeration system and must be installed, commissioned, charged, and documented by a qualified, licensed HVAC\/R technician. System sizing must be based on an application-specific heat-load calculation rather than cellar volume alone.\u003c\/div\u003e\n\u003c\/header\u003e\n\u003csection class=\"wce-ai-summary\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eProduct Overview\u003c\/span\u003e\n\u003ch2\u003eProduct Summary\u003c\/h2\u003e\n\u003cp\u003eThe \u003cstrong\u003eWhisperKOOL S-WKBT-MINI-OMEGA\u003c\/strong\u003e combines a Mini Blow-Through evaporator with an \u003cstrong\u003eOMEGA 110V H.E. air-cooled condensing unit\u003c\/strong\u003e. It is intended for concealed wine cellar installations and supports ducted, ductless, or hybrid airflow using a required configuration kit.\u003c\/p\u003e\n\u003cp\u003eThe system is rated for approximately \u003cstrong\u003e500 cubic feet\u003c\/strong\u003e under suitable cellar conditions, but final selection must be confirmed through a professional heat-load calculation.\u003c\/p\u003e\n\u003cdiv class=\"wce-highlight-box\"\u003e\n\u003ch3\u003eBest For\u003c\/h3\u003e\n\u003cp\u003eGlass wine walls, luxury residential cellars, built-in wine cabinets, overhead soffits, custom millwork, restaurant wine displays, hospitality projects, and installations where the cooling equipment should remain out of view.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-quick-specifications\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eAt a Glance\u003c\/span\u003e\n\u003ch2\u003eQuick Product Facts\u003c\/h2\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eProduct\u003c\/th\u003e\n\u003ctd\u003eWhisperKOOL Mini Blow-Through OMEGA 110V H.E. Split Wine Cellar Cooling System\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eModel\u003c\/th\u003e\n\u003ctd\u003eS-WKBT-MINI-OMEGA\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem Type\u003c\/th\u003e\n\u003ctd\u003eAir-cooled split wine cellar cooling system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEvaporator\u003c\/th\u003e\n\u003ctd\u003eWhisperKOOL Mini Blow-Through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondenser\u003c\/th\u003e\n\u003ctd\u003eWhisperKOOL OMEGA 110V H.E.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eControl Method\u003c\/th\u003e\n\u003ctd\u003eKDT remote digital display with liquid-temperature bottle probe\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAirflow Options\u003c\/th\u003e\n\u003ctd\u003eDucted, ductless, or hybrid\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRequired Selection\u003c\/th\u003e\n\u003ctd\u003eOne compatible airflow configuration kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate Cellar Size\u003c\/th\u003e\n\u003ctd\u003eUp to approximately 500 cu. ft. under proper design conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR-134a per supplied installation and charging documentation\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEvaporator Fan\u003c\/th\u003e\n\u003ctd\u003eTwo-speed airflow control\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondensate Management\u003c\/th\u003e\n\u003ctd\u003eBuilt-in condensate pump system\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum Line-Set Distance\u003c\/th\u003e\n\u003ctd\u003eUp to 100 ft., subject to installation requirements\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation\u003c\/th\u003e\n\u003ctd\u003eQualified, licensed HVAC\/R technician required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003eSizing notice:\u003c\/strong\u003e The approximate cellar-size rating assumes a fully insulated and sealed wine cellar with a properly installed vapor barrier. Glass, exterior walls, doors, ceiling height, ambient conditions, lighting, occupancy, and other heat sources can significantly change the required capacity.\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-features\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eSystem Advantages\u003c\/span\u003e\n\u003ch2\u003eWhy Choose the WhisperKOOL Mini Blow-Through System?\u003c\/h2\u003e\n\u003ch3\u003eConcealed Cooling for Modern Wine Cellars\u003c\/h3\u003e\n\u003cp\u003eThe Mini Blow-Through is designed for installations where the cooling equipment should not compete with the cellar's architecture. It can be positioned in a soffit, ceiling cavity, custom cabinet, attic, cellar enclosure, or adjacent mechanical space while directing conditioned air into the wine cellar.\u003c\/p\u003e\n\u003ch3\u003eThree Airflow Configuration Options\u003c\/h3\u003e\n\u003cp\u003eThe evaporator can be configured for fully ducted, fully ductless, or hybrid airflow. This allows the supply and return paths to be adapted to the available installation space, architectural design, register placement, and service-access requirements.\u003c\/p\u003e\n\u003ch3\u003eLiquid-Temperature Bottle Probe\u003c\/h3\u003e\n\u003cp\u003eThe included bottle probe measures liquid temperature instead of relying only on rapidly changing ambient air temperature. This helps the controller respond to temperature changes in a way that better reflects the thermal condition of the stored wine.\u003c\/p\u003e\n\u003ch3\u003eRemote Digital Control\u003c\/h3\u003e\n\u003cp\u003eThe KDT digital display can be installed remotely using the supplied 50-ft. display cable. It provides system control, temperature information, and advanced system-protection alerts without requiring the evaporator to remain visible.\u003c\/p\u003e\n\u003ch3\u003eBuilt-In Condensate Management\u003c\/h3\u003e\n\u003cp\u003eThe evaporator includes an internal condensate pump to assist with moisture removal. A properly routed drain line is still required, and condensate operation must be tested during commissioning.\u003c\/p\u003e\n\u003ch3\u003eTwo-Speed Airflow Control\u003c\/h3\u003e\n\u003cp\u003eThe Mini Blow-Through evaporator includes a two-speed fan switch. Higher airflow can increase cooling output and air circulation, while the lower setting may reduce airflow sound where the installation allows it.\u003c\/p\u003e\n\u003ch3\u003eService-Friendly Construction\u003c\/h3\u003e\n\u003cp\u003eDual-side service access, configurable line-set routing, removable components, upward-facing connections, and accessible electrical connections help simplify installation and future maintenance.\u003c\/p\u003e\n\u003ch3\u003eFlare Connection Design\u003c\/h3\u003e\n\u003cp\u003eThe refrigerant piping connections are designed to support properly prepared flare fittings. Correct cutting, deburring, flaring, lubrication, torque, evacuation, pressure testing, charging, and leak testing remain the responsibility of the qualified installer.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-applications\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eRecommended Uses\u003c\/span\u003e\n\u003ch2\u003eIdeal Applications\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eLuxury residential wine cellars\u003c\/li\u003e\n\u003cli\u003eGlass-enclosed wine rooms\u003c\/li\u003e\n\u003cli\u003eBuilt-in wine walls\u003c\/li\u003e\n\u003cli\u003eCustom wine cabinetry\u003c\/li\u003e\n\u003cli\u003eOverhead soffit installations\u003c\/li\u003e\n\u003cli\u003eAdjacent mechanical-room installations\u003c\/li\u003e\n\u003cli\u003eRestaurant wine displays\u003c\/li\u003e\n\u003cli\u003eHospitality and tasting-room projects\u003c\/li\u003e\n\u003cli\u003eCustom millwork installations\u003c\/li\u003e\n\u003cli\u003eProjects with restricted equipment visibility\u003c\/li\u003e\n\u003cli\u003eApplications requiring flexible supply and return airflow\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-buyer-fit\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eBuyer Fit\u003c\/span\u003e\n\u003ch2\u003eWho This System Is For\u003c\/h2\u003e\n\u003cp\u003eThis system is a strong fit for buyers and project teams who:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eWant the wine cellar cooling equipment concealed from view\u003c\/li\u003e\n\u003cli\u003eNeed more airflow flexibility than a traditional through-the-wall system provides\u003c\/li\u003e\n\u003cli\u003eAre building a wine wall, cabinet, soffit, or custom millwork enclosure\u003c\/li\u003e\n\u003cli\u003eNeed separate evaporator and condenser placement\u003c\/li\u003e\n\u003cli\u003eHave access to a qualified HVAC\/R installer\u003c\/li\u003e\n\u003cli\u003eCan provide proper cellar insulation and a continuous vapor barrier\u003c\/li\u003e\n\u003cli\u003eWant liquid-temperature monitoring through a bottle probe\u003c\/li\u003e\n\u003cli\u003eNeed a compact split-system solution for a challenging installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-not-recommended\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eSelection Check\u003c\/span\u003e\n\u003ch2\u003eWho Should Not Choose This System?\u003c\/h2\u003e\n\u003cp\u003eThis product may not be appropriate when:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eA simple plug-in or through-the-wall cooling unit is required\u003c\/li\u003e\n\u003cli\u003eProfessional HVAC\/R installation is not available\u003c\/li\u003e\n\u003cli\u003eThe wine room is not insulated, sealed, or protected by a proper vapor barrier\u003c\/li\u003e\n\u003cli\u003eThere is no viable path for refrigerant piping, drainage, power, or control wiring\u003c\/li\u003e\n\u003cli\u003eThe condenser would be installed in a small, unventilated indoor enclosure\u003c\/li\u003e\n\u003cli\u003eThe project cannot provide the required airflow through registers or louvers\u003c\/li\u003e\n\u003cli\u003eThe system is being selected only from nominal room volume without a heat-load calculation\u003c\/li\u003e\n\u003cli\u003eRequired service clearances cannot be maintained\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-comparison\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eRequired Selection\u003c\/span\u003e\n\u003ch2\u003eRequired Airflow Configuration Kit\u003c\/h2\u003e\n\u003cp\u003eOne airflow kit must be selected. The correct kit depends on whether the supply and return air will be connected to ductwork, discharged directly through deflectors, or arranged as a combination of both.\u003c\/p\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eConfiguration\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKit Components\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eBest Application\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDucted Airflow Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 duct plenums\u003c\/td\u003e\n\u003ctd\u003eBoth supply and return air are connected to insulated ductwork. Appropriate when the evaporator is positioned away from the cellar openings or when register placement requires separate duct runs.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDuctless Airflow Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e2 airflow deflectors\u003c\/td\u003e\n\u003ctd\u003eSupply and return air are directed from the evaporator without full duct runs. Appropriate for soffits, cabinetry, and concealed in-cellar placements with properly aligned openings.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eHybrid Airflow Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e1 duct plenum and 1 airflow deflector\u003c\/td\u003e\n\u003ctd\u003eOne side is ducted while the other uses a directional deflector. Appropriate when only the supply or return requires ducting.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe Blow-Through configuration documentation illustrates multiple supply and return orientations, including front, rear, downward, fully ducted, and mixed ducted\/deflector arrangements. The installer must select the final configuration before cutting register openings or mounting the evaporator.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-airflow-guide\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eConfiguration Guide\u003c\/span\u003e\n\u003ch2\u003eAirflow Configuration Guide\u003c\/h2\u003e\n\u003ch3\u003eFully Ducted Configuration\u003c\/h3\u003e\n\u003cp\u003eIn a fully ducted installation, both supply and return air are routed between the evaporator and the cellar through insulated ductwork. This can provide the greatest freedom in equipment placement, but the duct design must remain within the manufacturer's airflow and run-length requirements.\u003c\/p\u003e\n\u003ch3\u003eDuctless Configuration\u003c\/h3\u003e\n\u003cp\u003eIn a ductless configuration, directional deflectors route the return and supply airflow through aligned openings in the soffit, cabinet, or enclosure. The available arrangements permit the airflow to face forward, backward, or downward depending on the installation.\u003c\/p\u003e\n\u003ch3\u003eHybrid Configuration\u003c\/h3\u003e\n\u003cp\u003eA hybrid configuration uses a duct plenum on either the supply or return side and a deflector on the opposite side. This option is useful when one airflow path can discharge directly while the other must be routed to a separate register location.\u003c\/p\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003ePlanning requirement:\u003c\/strong\u003e Confirm the selected airflow configuration and final register locations before cutting openings or lifting the evaporator into place. Framing, insulation, trim, racking, and finished millwork must not obstruct the supply or return air paths.\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-add-ons\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eSystem Options\u003c\/span\u003e\n\u003ch2\u003eOptional Add-Ons\u003c\/h2\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eOptional Add-On\u003c\/th\u003e\n\u003cth scope=\"col\"\u003ePurpose\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003e24V Thermostat Conversion Kit\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eAllows the system to operate with a compatible third-party 24V thermostat. The thermostat must be properly located within the wine cellar and wired according to the appropriate pump-down control instructions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eExterior Enclosure for OMEGA Condenser\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eRequired when the OMEGA condensing unit is installed outdoors. The enclosure helps protect the condenser from outdoor exposure.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eDucting Kit for OMEGA Condenser\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eUsed when the OMEGA condenser is installed indoors and condenser airflow must be ducted to and from an appropriate ventilated location.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eCondenser Coil Coating\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003eProvides added coil protection for applications where the condenser may be exposed to corrosive or demanding environmental conditions.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-controller-comparison\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eControl Options\u003c\/span\u003e\n\u003ch2\u003eKDT Controller vs. Optional 24V Thermostat Control\u003c\/h2\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eFeature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eKDT Controller\u003c\/th\u003e\n\u003cth scope=\"col\"\u003e24V Thermostat\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003ePrimary Temperature Measurement\u003c\/td\u003e\n\u003ctd\u003eLiquid-temperature bottle probe\u003c\/td\u003e\n\u003ctd\u003eThermostat air sensor\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRemote Monitoring\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003eMay be available with a compatible smart thermostat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eAdvanced System Protection Alerts\u003c\/td\u003e\n\u003ctd\u003eIncluded\u003c\/td\u003e\n\u003ctd\u003eNot provided through the third-party thermostat\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHumidity Control Integration\u003c\/td\u003e\n\u003ctd\u003eNot included\u003c\/td\u003e\n\u003ctd\u003ePotentially available with a compatible thermostat and field design\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWhisperKOOL Warranty\u003c\/td\u003e\n\u003ctd\u003eIncluded with the system when warranty requirements are satisfied\u003c\/td\u003e\n\u003ctd\u003eThe thermostat itself is covered by its manufacturer, not WhisperKOOL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe KDT configuration is best for buyers who prioritize bottle-temperature sensing and system-specific protection alerts. The 24V conversion option may be preferred when compatible remote-monitoring or third-party thermostat functionality is required.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-specifications\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eEvaporator Specifications\u003c\/span\u003e\n\u003ch2\u003eMini Blow-Through Evaporator Specifications\u003c\/h2\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEvaporator Model\u003c\/th\u003e\n\u003ctd\u003eMini Blow-Through\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate Cellar Capacity\u003c\/th\u003e\n\u003ctd\u003eApproximately 500 cu. ft. under suitable cellar conditions\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eFan Speeds\u003c\/th\u003e\n\u003ctd\u003eMedium and high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eAirflow\u003c\/th\u003e\n\u003ctd\u003eApproximately 109 CFM at medium and 185 CFM at high\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDucted Dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 27.5 in. L × 12.5 in. W × 10.5 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuctless Dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 30.18 in. L × 12.5 in. W × 10.5 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eHybrid Dimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 28.84 in. L × 12.5 in. W × 10.5 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate Weight\u003c\/th\u003e\n\u003ctd\u003e45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eEvaporator Running Amps\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.64 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical Requirement\u003c\/th\u003e\n\u003ctd\u003e120V nominal; dedicated 15-amp circuit required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondensate Management\u003c\/th\u003e\n\u003ctd\u003eInternal condensate pump with drain connection\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eController\u003c\/th\u003e\n\u003ctd\u003eKDT advanced digital display with 50-ft. cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eTemperature Sensor\u003c\/th\u003e\n\u003ctd\u003eLiquid-temperature bottle probe with 50-ft. cable\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDuct Guideline\u003c\/th\u003e\n\u003ctd\u003e8-in. ducting with a maximum recommended run of 25 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eInstallation Locations\u003c\/th\u003e\n\u003ctd\u003eCellar, soffit, attic, cabinetry, or adjacent mechanical space\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eDimensions may vary according to the selected deflector, plenum, or hybrid arrangement. Confirm all current dimensional drawings and clearance requirements before framing or fabricating millwork.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-performance\"\u003e\u003cspan class=\"wce-eyebrow\"\u003ePerformance Data\u003c\/span\u003e\n\u003ch2\u003eCooling Performance\u003c\/h2\u003e\n\u003cp\u003eCooling output varies with condenser entering-air temperature, evaporator fan speed, airflow configuration, cellar temperature, duct resistance, refrigerant charge, and installation quality.\u003c\/p\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eCondenser Entering-Air Temperature\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMedium Fan\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eHigh Fan\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximately 85°F\u003c\/td\u003e\n\u003ctd\u003e1,876 sensible \/ 2,263 total BTU\/h\u003c\/td\u003e\n\u003ctd\u003e1,969 sensible \/ 2,376 total BTU\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximately 75°F\u003c\/td\u003e\n\u003ctd\u003e1,919 sensible \/ 2,333 total BTU\/h\u003c\/td\u003e\n\u003ctd\u003e2,015 sensible \/ 2,450 total BTU\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApproximately 60°F\u003c\/td\u003e\n\u003ctd\u003e2,198 sensible \/ 2,818 total BTU\/h\u003c\/td\u003e\n\u003ctd\u003e2,308 sensible \/ 2,959 total BTU\/h\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003ePerformance notice:\u003c\/strong\u003e These ratings are manufacturer test values and should not be interpreted as a substitute for a professional heat-load calculation. Fully ducted installations may produce different delivered capacity because of duct resistance and airflow losses.\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-condenser-specifications\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eCondenser Specifications\u003c\/span\u003e\n\u003ch2\u003eOMEGA 110V H.E. Condenser Specifications\u003c\/h2\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondenser Type\u003c\/th\u003e\n\u003ctd\u003eAir-cooled split-system condensing unit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eNominal Voltage\u003c\/th\u003e\n\u003ctd\u003e110V–120V class, according to unit nameplate\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eElectrical Circuit\u003c\/th\u003e\n\u003ctd\u003eDedicated 15-amp circuit required\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eCondenser Horsepower\u003c\/th\u003e\n\u003ctd\u003eApproximately 0.35 HP\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eDimensions\u003c\/th\u003e\n\u003ctd\u003eApproximately 31.18 in. L × 10.75 in. W × 21.18 in. H\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eApproximate Weight\u003c\/th\u003e\n\u003ctd\u003eApproximately 50.7 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRunning Amps\u003c\/th\u003e\n\u003ctd\u003eApproximately 1.7 A\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eRefrigerant\u003c\/th\u003e\n\u003ctd\u003eR-134a per supplied charging and installation documents\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eMaximum Line-Set Distance\u003c\/th\u003e\n\u003ctd\u003eUp to 100 ft.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eOutdoor Installation\u003c\/th\u003e\n\u003ctd\u003eRequires the compatible OMEGA exterior enclosure\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eIndoor Installation\u003c\/th\u003e\n\u003ctd\u003eRequires adequate heat rejection and may require the compatible OMEGA ducting kit\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003cth scope=\"row\"\u003eSystem Operation\u003c\/th\u003e\n\u003ctd\u003ePump-down control cycle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-line-set\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eRefrigerant Piping\u003c\/span\u003e\n\u003ch2\u003eRefrigerant Line-Set Requirements\u003c\/h2\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eLine\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eUp to 50 ft.\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eMore Than 50 ft. to 100 ft.\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eLiquid Line\u003c\/td\u003e\n\u003ctd\u003e1\/4-in. OD\u003c\/td\u003e\n\u003ctd\u003e1\/4-in. OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuction Line\u003c\/td\u003e\n\u003ctd\u003e3\/8-in. OD\u003c\/td\u003e\n\u003ctd\u003e1\/2-in. OD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe installer must record the actual line-set length, vertical rise, line diameters, refrigerant charge, operating pressures, superheat, subcooling, voltage, and amperage on the split-system warranty checklist.\u003c\/p\u003e\n\u003cp\u003eWhere the condenser is positioned above the evaporator, oil-management piping requirements must be followed. All suction-line insulation seams and penetrations must be completely sealed to prevent condensation and heat gain.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-charge-reference\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eInstaller Reference\u003c\/span\u003e\n\u003ch2\u003eInitial Refrigerant Charge Reference\u003c\/h2\u003e\n\u003cp\u003eThe Mini condenser charge chart provides approximate starting charge weights based on line-set length. These values are not final commissioning targets. The installer must verify operating conditions and adjust the system using the applicable superheat and subcooling requirements.\u003c\/p\u003e\n\u003cdiv class=\"wce-table-wrap\"\u003e\n\u003ctable\u003e\n\u003cthead\u003e\n\u003ctr\u003e\n\u003cth scope=\"col\"\u003eLine-Set Length\u003c\/th\u003e\n\u003cth scope=\"col\"\u003eApproximate Initial Charge\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003c\/thead\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003e10 ft.\u003c\/td\u003e\n\u003ctd\u003e2.00 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e20 ft.\u003c\/td\u003e\n\u003ctd\u003e2.15 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e30 ft.\u003c\/td\u003e\n\u003ctd\u003e2.30 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e40 ft.\u003c\/td\u003e\n\u003ctd\u003e2.45 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e50 ft.\u003c\/td\u003e\n\u003ctd\u003e2.60 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e60 ft.\u003c\/td\u003e\n\u003ctd\u003e2.75 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e70 ft.\u003c\/td\u003e\n\u003ctd\u003e2.90 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e80 ft.\u003c\/td\u003e\n\u003ctd\u003e3.05 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e90 ft.\u003c\/td\u003e\n\u003ctd\u003e3.20 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e100 ft.\u003c\/td\u003e\n\u003ctd\u003e3.35 lbs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003eInstaller notice:\u003c\/strong\u003e Refrigerant charging and TXV adjustment must be performed only by a qualified refrigeration technician using the current WhisperKOOL charging documentation. The system should be allowed to operate under load before readings are evaluated.\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-register-requirements\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eAirflow Openings\u003c\/span\u003e\n\u003ch2\u003eRegister and Louver Requirements\u003c\/h2\u003e\n\u003cp\u003eDecorative registers and custom wooden grilles must provide sufficient free area for unrestricted airflow. Restricted openings can reduce cooling performance, increase airflow noise, raise static pressure, contribute to evaporator icing, and shorten system life.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRegisters and louvers should provide approximately 50% to 65% free open area.\u003c\/li\u003e\n\u003cli\u003eDo not install restrictive mesh, screens, acoustic foam, or solid backing behind the register.\u003c\/li\u003e\n\u003cli\u003eAccount for the effect of paint, stain, sealant, and finishing materials on the final slot opening.\u003c\/li\u003e\n\u003cli\u003eMaintain consistent open area across the register face.\u003c\/li\u003e\n\u003cli\u003eConfirm the final design before fabrication or installation.\u003c\/li\u003e\n\u003cli\u003eKeep supply and return airflow unobstructed by racking, trim, framing, or stored bottles.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eFree area can be estimated by multiplying the total register face area by the required open-area percentage. The project designer and installer are responsible for confirming that customer-supplied grilles comply with the manufacturer's airflow requirements.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-ducting-considerations\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eDuct Design\u003c\/span\u003e\n\u003ch2\u003eLinear Register and Ducting Considerations\u003c\/h2\u003e\n\u003cp\u003eLinear registers must be selected with enough open-air area to support the system's airflow. Narrow decorative slots can appear large while still providing insufficient free area.\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eLinear registers should generally be at least 48 in. long when used for these applications.\u003c\/li\u003e\n\u003cli\u003eSupply and return openings must provide adequate total free area.\u003c\/li\u003e\n\u003cli\u003eRestrictive internal diffusers may need to be removed when directed by the applicable installation guidance.\u003c\/li\u003e\n\u003cli\u003eUse properly sized branch fittings where ductwork serves multiple register locations.\u003c\/li\u003e\n\u003cli\u003eInsulated ductwork must be supported to prevent sagging and stress on the evaporator collars.\u003c\/li\u003e\n\u003cli\u003eEach 90-degree duct bend reduces available airflow and should be minimized.\u003c\/li\u003e\n\u003cli\u003eAll duct joints must be mechanically secured and sealed against leakage.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-cellar-requirements\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eCellar Preparation\u003c\/span\u003e\n\u003ch2\u003eWine Cellar Construction Requirements\u003c\/h2\u003e\n\u003cp\u003eCooling-system performance depends on the quality of the wine cellar enclosure. A cooling unit cannot compensate for an improperly constructed room.\u003c\/p\u003e\n\u003ch3\u003eInsulation\u003c\/h3\u003e\n\u003cp\u003eAll walls and ceilings must be insulated. Higher insulation values reduce heat gain, system runtime, and operating cost. The supplied installation documentation identifies R-13 as a minimum reference, with higher values preferred for walls, ceilings, and exterior assemblies.\u003c\/p\u003e\n\u003ch3\u003eVapor Barrier\u003c\/h3\u003e\n\u003cp\u003eA continuous vapor barrier is required on the warm side of the wine cellar assembly. Cuts, fasteners, conduit penetrations, seams, wall openings, and transitions must be sealed to prevent warm, moist air from entering the cooled enclosure.\u003c\/p\u003e\n\u003ch3\u003eCellar Door\u003c\/h3\u003e\n\u003cp\u003eThe cellar should use a properly insulated exterior-grade door with weather stripping on all sides and an effective bottom sweep or threshold. Air leakage around the door can cause extended runtime and difficulty maintaining the target temperature.\u003c\/p\u003e\n\u003ch3\u003eGlass-Enclosed Cellars\u003c\/h3\u003e\n\u003cp\u003eGlass has a lower insulating value than a conventional insulated wall. Glass quantity, glass type, exposure, room size, and surrounding ambient temperature must be included in the heat-load calculation.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-installation-notes\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eEvaporator Installation\u003c\/span\u003e\n\u003ch2\u003eEvaporator Installation Requirements\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eConfirm the voltage shown on the evaporator nameplate before installation.\u003c\/li\u003e\n\u003cli\u003eProvide a dedicated 15-amp electrical circuit.\u003c\/li\u003e\n\u003cli\u003eDo not use a GFCI\/GFI outlet or breaker unless specifically required and approved for the installation.\u003c\/li\u003e\n\u003cli\u003eMount the evaporator high in the cellar or in the planned soffit location.\u003c\/li\u003e\n\u003cli\u003eProvide a structurally supported platform capable of carrying the operating weight.\u003c\/li\u003e\n\u003cli\u003eMaintain at least 12 in. of front service clearance.\u003c\/li\u003e\n\u003cli\u003eInstall the supplied exterior insulation blanket before placing the evaporator in the soffit or enclosure.\u003c\/li\u003e\n\u003cli\u003eAdd the required surrounding fiberglass insulation where the unit is exposed to an attic or warm cavity.\u003c\/li\u003e\n\u003cli\u003eDo not cover service panels, drain connections, wiring access, knockouts, or duct collars.\u003c\/li\u003e\n\u003cli\u003eKeep the evaporator level from side to side and front to back.\u003c\/li\u003e\n\u003cli\u003eRoute and seal refrigerant lines, drain piping, power, display cable, and bottle-probe cable.\u003c\/li\u003e\n\u003cli\u003eProvide unobstructed supply and return airflow.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003eMoisture-control notice:\u003c\/strong\u003e Improper insulation around a concealed evaporator can cause surface condensation, water damage, rust, corrosion, loss of capacity, and warranty issues.\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-condenser-installation\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eCondenser Installation\u003c\/span\u003e\n\u003ch2\u003eCondenser Installation Requirements\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProvide a dedicated electrical circuit matching the condenser nameplate.\u003c\/li\u003e\n\u003cli\u003eInstall the condenser in a location with adequate heat rejection.\u003c\/li\u003e\n\u003cli\u003eDo not place an unducted condenser in a small, unventilated closet.\u003c\/li\u003e\n\u003cli\u003eMaintain the required service and airflow clearance around the condenser.\u003c\/li\u003e\n\u003cli\u003eUse the exterior enclosure when the OMEGA condenser is installed outdoors.\u003c\/li\u003e\n\u003cli\u003eUse the compatible ducting arrangement when an indoor installation requires ducted heat rejection.\u003c\/li\u003e\n\u003cli\u003eKeep condenser intake air within the manufacturer's permitted operating conditions.\u003c\/li\u003e\n\u003cli\u003eInstall the condenser level and securely supported.\u003c\/li\u003e\n\u003cli\u003eAllow the condenser to remain upright before start-up if required after shipment.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe installation documentation states that the system is designed to maintain approximately 55°F cellar conditions when the application is properly designed and the condenser entering-air temperature remains within the stated operating range. Excessively warm condenser air reduces cooling capacity and may shorten system life.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-operation\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eSystem Operation\u003c\/span\u003e\n\u003ch2\u003ePump-Down System Operation\u003c\/h2\u003e\n\u003cp\u003eThe system uses a refrigeration pump-down control sequence. When cooling is required, the liquid-line solenoid opens and refrigerant pressure allows the condensing unit to start. When the controller is satisfied, the solenoid closes and the compressor continues operating until the low-side pressure drops to the cutout setting.\u003c\/p\u003e\n\u003cp\u003ePump-down operation stores most of the refrigerant on the high side when the system is off. This control arrangement must be installed and commissioned according to the appropriate WhisperKOOL wiring and refrigeration diagrams.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-included\"\u003e\u003cspan class=\"wce-eyebrow\"\u003ePackage Contents\u003c\/span\u003e\n\u003ch2\u003eWhat Is Included?\u003c\/h2\u003e\n\u003cp\u003eThe complete system package is expected to include the applicable system components and documentation:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMini Blow-Through evaporator\u003c\/li\u003e\n\u003cli\u003eOMEGA 110V H.E. condensing unit\u003c\/li\u003e\n\u003cli\u003eKDT digital display assembly\u003c\/li\u003e\n\u003cli\u003e50-ft. display cable\u003c\/li\u003e\n\u003cli\u003e50-ft. bottle probe\u003c\/li\u003e\n\u003cli\u003eEvaporator installation hardware\u003c\/li\u003e\n\u003cli\u003eDrain fittings and plugs\u003c\/li\u003e\n\u003cli\u003ePower cord or applicable electrical connection components\u003c\/li\u003e\n\u003cli\u003eExterior evaporator insulation components\u003c\/li\u003e\n\u003cli\u003eOwner's and installation documentation\u003c\/li\u003e\n\u003cli\u003eSplit-system warranty checklist\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003eRequired airflow kit:\u003c\/strong\u003e Select the ducted, ductless, or hybrid kit required for the installation. Verify the packing slip and order configuration when the shipment is received.\u003c\/div\u003e\n\u003ch3\u003eCommon Field-Supplied Materials\u003c\/h3\u003e\n\u003cp\u003eRefrigerant tubing, field wiring, thermostat wire, ductwork, registers, structural framing, additional insulation, sealants, electrical circuits, outdoor mounting materials, and general installation supplies may be field supplied unless specifically listed on the order.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-commissioning\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eProfessional Installation\u003c\/span\u003e\n\u003ch2\u003eProfessional Installation and Commissioning\u003c\/h2\u003e\n\u003cp\u003eWhisperKOOL split systems must be installed by a qualified, licensed HVAC\/R technician. The installer should be familiar with refrigeration pressure testing, nitrogen purging, evacuation, flare preparation, pump-down controls, TXV adjustment, superheat, subcooling, condensate systems, and wine cellar applications.\u003c\/p\u003e\n\u003cp\u003eCommissioning includes, but is not limited to:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInspecting all components before installation\u003c\/li\u003e\n\u003cli\u003eConfirming evaporator and condenser voltage\u003c\/li\u003e\n\u003cli\u003ePressure testing the refrigerant system\u003c\/li\u003e\n\u003cli\u003eLeak testing all connections\u003c\/li\u003e\n\u003cli\u003eEvacuating the system with an appropriate micron gauge\u003c\/li\u003e\n\u003cli\u003eCharging with the specified refrigerant\u003c\/li\u003e\n\u003cli\u003eAdjusting the TXV when required\u003c\/li\u003e\n\u003cli\u003eConfirming superheat and subcooling\u003c\/li\u003e\n\u003cli\u003eRecording operating pressures and temperatures\u003c\/li\u003e\n\u003cli\u003eConfirming voltage and amperage\u003c\/li\u003e\n\u003cli\u003eTesting the condensate drain and pump\u003c\/li\u003e\n\u003cli\u003eConfirming supply and return airflow\u003c\/li\u003e\n\u003cli\u003eCompleting the split-system warranty checklist\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-maintenance\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eOngoing Care\u003c\/span\u003e\n\u003ch2\u003eMaintenance Recommendations\u003c\/h2\u003e\n\u003cp\u003eAnnual preventive maintenance is essential for reliable operation, warranty compliance, and reduced risk of unexpected cellar downtime.\u003c\/p\u003e\n\u003cp\u003eA qualified service technician should inspect and service the following:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply and return duct insulation\u003c\/li\u003e\n\u003cli\u003eVapor-barrier integrity\u003c\/li\u003e\n\u003cli\u003eRegisters and grilles\u003c\/li\u003e\n\u003cli\u003eAir filters, when applicable\u003c\/li\u003e\n\u003cli\u003eEvaporator and condenser coils\u003c\/li\u003e\n\u003cli\u003eCoil fins and signs of refrigerant leakage\u003c\/li\u003e\n\u003cli\u003eDrain pan, drain line, condensate pump, and moisture accumulation\u003c\/li\u003e\n\u003cli\u003eElectrical connections, relays, and contactors\u003c\/li\u003e\n\u003cli\u003eFan operation\u003c\/li\u003e\n\u003cli\u003eVoltage and amperage\u003c\/li\u003e\n\u003cli\u003eRefrigerant pressures\u003c\/li\u003e\n\u003cli\u003eSuperheat and subcooling\u003c\/li\u003e\n\u003cli\u003eSight-glass condition\u003c\/li\u003e\n\u003cli\u003eController probes\u003c\/li\u003e\n\u003cli\u003eBottle-probe condition\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eThe bottle probe should be cleaned periodically, and the water in the probe bottle should be refreshed as part of routine maintenance.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-warranty\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eWarranty\u003c\/span\u003e\n\u003ch2\u003eWarranty Information\u003c\/h2\u003e\n\u003cp\u003eWhisperKOOL split systems are supplied with a limited two-year product warranty, subject to the manufacturer's current terms, exclusions, installation requirements, and approval process.\u003c\/p\u003e\n\u003cp\u003eThe warranty begins from the purchase date, but activation requires the installing certified HVAC\/R technician to complete and submit the applicable split-system warranty checklist. The warranty is not considered active until the documentation has been received, reviewed, and approved.\u003c\/p\u003e\n\u003cp\u003eThe checklist requires installation and start-up information such as:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInstaller name and company information\u003c\/li\u003e\n\u003cli\u003eSystem model and serial numbers\u003c\/li\u003e\n\u003cli\u003eLine-set length, rise, and diameters\u003c\/li\u003e\n\u003cli\u003ePressure and temperature readings\u003c\/li\u003e\n\u003cli\u003eSuperheat and subcooling\u003c\/li\u003e\n\u003cli\u003eRefrigerant charge weight\u003c\/li\u003e\n\u003cli\u003eVoltage and amperage\u003c\/li\u003e\n\u003cli\u003eCondensate drain-test results\u003c\/li\u003e\n\u003cli\u003eSystem start-up date\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cdiv class=\"wce-important-notice\"\u003e\n\u003cstrong\u003eWarranty notice:\u003c\/strong\u003e Installation by an unqualified party, inadequate airflow, improper cellar construction, incorrect charging, insufficient insulation, improper drainage, restricted condenser ventilation, or failure to submit the required checklist may affect warranty coverage.\u003c\/div\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-buying-guide\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eConfiguration Guidance\u003c\/span\u003e\n\u003ch2\u003eBuying Considerations\u003c\/h2\u003e\n\u003ch3\u003eChoose the Ducted Kit When:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe evaporator will be located away from the cellar registers\u003c\/li\u003e\n\u003cli\u003eBoth supply and return air need dedicated duct runs\u003c\/li\u003e\n\u003cli\u003eThe equipment will be installed in an adjacent space or remote soffit\u003c\/li\u003e\n\u003cli\u003eRegister locations cannot align directly with the evaporator openings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose the Ductless Kit When:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eThe evaporator can be positioned directly behind the supply and return openings\u003c\/li\u003e\n\u003cli\u003eThe unit is concealed in a soffit, cabinet, or cellar enclosure\u003c\/li\u003e\n\u003cli\u003eShort, direct airflow paths are available\u003c\/li\u003e\n\u003cli\u003eFull duct runs are unnecessary or impractical\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose the Hybrid Kit When:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eOnly one airflow path requires ducting\u003c\/li\u003e\n\u003cli\u003eThe supply or return opening aligns directly with the evaporator\u003c\/li\u003e\n\u003cli\u003eThe opposite airflow path must be routed to another location\u003c\/li\u003e\n\u003cli\u003eThe design combines a local grille with a remote register\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eChoose the 24V Thermostat Kit When:\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eA compatible third-party smart thermostat is desired\u003c\/li\u003e\n\u003cli\u003eRemote temperature monitoring is a project priority\u003c\/li\u003e\n\u003cli\u003eThe project team accepts air-temperature sensing instead of the standard bottle-probe control method\u003c\/li\u003e\n\u003cli\u003eThe installer can complete the required 24V wiring and control setup\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-resources\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eOfficial Documentation\u003c\/span\u003e\n\u003ch2\u003eDownloads and Product Resources\u003c\/h2\u003e\n\u003cp\u003eReview the applicable installation, charging, airflow, maintenance, and warranty documentation before ordering or installing the system.\u003c\/p\u003e\n\u003cul class=\"wce-resource-list\"\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/WK_Maintenance_Checklist_Blow_Through_Series.pdf?v=1785318338\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Blow-Through Series Maintenance Checklist\" target=\"_blank\"\u003e WhisperKOOL Blow-Through Series Maintenance Checklist \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/WK_Blow_Through_Series_Sales_Sheet_WEB.pdf?v=1785318338\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Blow-Through Series Sales Sheet\" target=\"_blank\"\u003e WhisperKOOL Blow-Through Series Sales Sheet \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/Blow-Through_Configuration_Sheet.pdf?v=1785318341\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Blow-Through Airflow Configuration Sheet\" target=\"_blank\"\u003e Blow-Through Airflow Configuration Sheet \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/WK_MINI_CHARGE_CHART.pdf?v=1785318341\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Mini Condenser Refrigerant Charge Chart\" target=\"_blank\"\u003e WhisperKOOL Mini Condenser Charge Chart \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/KDT-vs.-24V-Comp-Chart.pdf?v=1785318351\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL KDT Controller and 24V Thermostat Comparison Chart\" target=\"_blank\"\u003e KDT Controller vs. 24V Thermostat Comparison Chart \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/Blow-Through_Product_Sheet.pdf?v=1785318361\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Blow-Through Series Product and Specification Sheet\" target=\"_blank\"\u003e WhisperKOOL Blow-Through Product and Specification Sheet \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/WK_Mini_Condenser_QuickStartGuide.pdf?v=1785318361\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Mini Condenser Quick Start Guide\" target=\"_blank\"\u003e WhisperKOOL Mini Condenser Quick Start Guide \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/Register_Louver_Airflow_Requirements.pdf?v=1785318363\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Register and Louver Airflow Requirements\" target=\"_blank\"\u003e Register and Louver Airflow Requirements \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/WK_Blow_Through_Series_Omega_OM.pdf?v=1785339960\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Blow-Through Series and Omega Owner's Manual\" target=\"_blank\"\u003e WhisperKOOL Blow-Through Series and OMEGA Owner's Manual \u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/Linear_Register_Ducting_Best_Practices.pdf?v=1785318516\" rel=\"noopener noreferrer\" title=\"Download the WhisperKOOL Linear Register Ducting Best Practices Guide\" target=\"_blank\"\u003e Linear Register Ducting Best Practices \u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-faq\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eCommon Questions\u003c\/span\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eWhat is the WhisperKOOL Mini Blow-Through OMEGA system?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eIt is a split wine cellar cooling system consisting of a compact Mini Blow-Through evaporator and a separate OMEGA 110V H.E. air-cooled condenser. The evaporator conditions the cellar air, while the remote condenser rejects the collected heat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eHow large of a wine cellar can the Mini Blow-Through cool?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe manufacturer documentation identifies an approximate capacity of up to 500 cubic feet when the cellar is fully insulated, properly sealed, and protected by a continuous vapor barrier. A heat-load calculation is still required because glass, ambient temperatures, doors, lighting, and construction materials can change the actual capacity requirement.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eDoes this product require an airflow kit?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes. One compatible airflow kit must be selected: the ducted kit with two duct plenums, the ductless kit with two airflow deflectors, or the hybrid kit with one plenum and one deflector.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eWhat is the difference between ducted, ductless, and hybrid airflow?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eA ducted configuration connects both supply and return air to ductwork. A ductless configuration uses directional deflectors for both airflow paths. A hybrid configuration ducts one side and uses a deflector on the other.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eCan the Mini Blow-Through be hidden in a soffit?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes. Soffit installation is one of its intended applications. The soffit must be structurally capable of supporting the unit, provide the required front service clearance, contain properly aligned supply and return openings, and allow the evaporator to be fully insulated and serviced.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eCan it be used for a glass wine cellar or wine wall?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes, provided a professional heat-load calculation confirms the required capacity. Glass typically creates more heat gain than insulated walls, so the quantity, type, and exposure of the glass must be considered during system selection.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eIs the condensate pump included?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe evaporator is equipped with an internal condensate pump. A correctly routed discharge line is still required, and condensate drainage must be tested during installation and commissioning.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eDoes the system include a bottle probe?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes. The standard KDT configuration includes a liquid-temperature bottle probe with a 50-ft. cable. The probe is intended to measure the temperature of liquid in a bottle rather than only the surrounding air.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eCan I use a smart thermostat?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eA compatible smart thermostat may be used when the optional 24V thermostat conversion kit is selected and correctly installed. Third-party thermostat features and warranty coverage are provided by the thermostat manufacturer.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eWhat is the difference between the KDT controller and a 24V thermostat?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe KDT controller uses the supplied bottle probe and provides WhisperKOOL system-protection alerts. A 24V thermostat typically measures air temperature and may offer remote connectivity, depending on the selected thermostat.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eCan the OMEGA condenser be installed outdoors?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes, but the compatible OMEGA exterior enclosure is required for an outdoor installation. The condenser must be level, securely supported, and installed according to the applicable clearance and environmental requirements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eCan the OMEGA condenser be installed indoors?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes, provided the installation offers sufficient heat rejection. An indoor installation may require the compatible condenser ducting kit. The condenser should not discharge heat into a small, unventilated closet or enclosure.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eWhat electrical service does the system require?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe Mini Blow-Through evaporator and OMEGA condenser require electrical service that matches their respective nameplates. The supplied documentation calls for dedicated 15-amp circuits for the Mini system components.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eHow far can the condenser be installed from the evaporator?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe condenser can be installed up to approximately 100 line feet from the evaporator, subject to correct line sizing, vertical-rise requirements, oil-management practices, refrigerant charging, and manufacturer installation instructions.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eWhat line-set sizes are required?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe liquid line is generally 1\/4-in. OD. The suction line is generally 3\/8-in. OD for runs up to 50 ft. and 1\/2-in. OD for runs over 50 ft. up to the permitted maximum. The installer must verify the final piping design against the current manual.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eDoes the system arrive fully charged?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe split system requires field evacuation, leak testing, charging, and commissioning. The supplied charge chart provides approximate initial charge values, but the final charge must be established by a qualified HVAC\/R technician using proper operating measurements.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eIs professional installation required?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eYes. This split refrigeration system must be installed by a qualified, licensed HVAC\/R technician. Improper installation can cause refrigerant leaks, water damage, insufficient cooling, equipment failure, and loss of warranty coverage.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eWhat cellar construction is required?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe cellar must be fully insulated, tightly sealed, and protected by a continuous vapor barrier. The door must seal correctly, and penetrations through the enclosure must be sealed against air and moisture infiltration.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eHow much free area should custom registers provide?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe manufacturer's airflow bulletin calls for approximately 50% to 65% free open area. Restrictive slats, mesh, screens, backing materials, or heavy finish buildup should not reduce the opening below the required airflow level.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eHow often should the system be maintained?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eAnnual professional preventive maintenance is recommended. Maintenance should include inspection of the coils, condensate system, drain line, pump, electrical components, airflow, refrigerant operation, controller probes, and bottle probe.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003cdetails class=\"wce-faq-item\"\u003e\n\u003csummary\u003eHow is the split-system warranty activated?\u003c\/summary\u003e\n\u003cdiv class=\"wce-faq-body\"\u003e\n\u003cp\u003eThe installing certified HVAC\/R technician must complete and submit the required split-system warranty checklist with the requested installation, charging, electrical, drainage, and start-up data. Warranty activation is subject to WhisperKOOL review and approval.\u003c\/p\u003e\n\u003c\/div\u003e\n\u003c\/details\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-selection-notice\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eBefore Ordering\u003c\/span\u003e\n\u003ch2\u003eImportant Product Selection Notice\u003c\/h2\u003e\n\u003cp\u003eWine cellar cooling capacity cannot be determined accurately from room volume alone. Before ordering the \u003cstrong\u003eWhisperKOOL Mini Blow-Through OMEGA 110V H.E. system\u003c\/strong\u003e, confirm the cellar construction, glass exposure, ambient conditions, desired temperature, insulation, vapor barrier, condenser location, airflow configuration, electrical service, drainage path, refrigerant piping route, register free area, and service clearances.\u003c\/p\u003e\n\u003cp\u003eFinal system selection and installation design should be reviewed by a qualified wine cellar professional and licensed HVAC\/R technician.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003csection class=\"wce-final-guidance\"\u003e\u003cspan class=\"wce-eyebrow\"\u003eFree Design Planning\u003c\/span\u003e\n\u003ch2\u003eNeed Help Planning Your Wine Cellar Cooling System?\u003c\/h2\u003e\n\u003cp\u003eWine Coolers Empire offers free professional wine cellar design planning to help evaluate equipment placement, airflow configuration, cellar layout, product selection, and system requirements before purchase.\u003c\/p\u003e\n\u003cp\u003eProper planning helps reduce sizing errors, airflow restrictions, installation conflicts, and avoidable changes during construction.\u003c\/p\u003e\n\u003c\/section\u003e\n\u003c\/section\u003e\n\u003cstyle\u003e\n.wce-product-page{\nmax-width:1120px;\nmargin:0 auto;\nfont-family:Arial,Helvetica,sans-serif;\ncolor:#344047;\nline-height:1.62\n}\n\n.wce-product-page *{\nbox-sizing:border-box\n}\n\n.wce-product-page\u003esection,\n.wce-product-header{\npadding:34px 40px;\nborder-top:1px solid #ececed\n}\n\n.wce-product-header{\nborder-top:none\n}\n\n.wce-product-page h1{\nfont-size:32px;\nline-height:1.18;\ncolor:#300b05;\nmargin:0 0 18px;\nfont-weight:800\n}\n\n.wce-product-page h2{\nfont-size:29px;\nline-height:1.2;\ncolor:#300b05;\nmargin:0 0 14px\n}\n\n.wce-product-page h3{\nfont-size:19px;\nline-height:1.3;\ncolor:#300b05;\nmargin:24px 0 8px\n}\n\n.wce-product-page p{\nfont-size:15px;\nmargin:0 0 14px\n}\n\n.wce-product-intro{\nfont-size:17px!important;\ncolor:#23150f\n}\n\n.wce-eyebrow{\ndisplay:inline-block;\nbackground:#5a1a0e;\ncolor:#fff;\nfont-size:11px;\nfont-weight:700;\nletter-spacing:.14em;\ntext-transform:uppercase;\npadding:6px 15px;\nborder-radius:30px;\nmargin-bottom:14px\n}\n\n.wce-product-header\u003e.wce-eyebrow{\nbackground:#c8a24a;\ncolor:#300b05;\nfont-weight:800\n}\n\n.wce-stats{\ndisplay:grid;\ngrid-template-columns:repeat(4,1fr);\ngap:16px;\nmargin:26px 0\n}\n\n.wce-stat{\nbackground:#43150d;\nborder-radius:16px;\npadding:24px 14px;\ntext-align:center;\nborder-top:4px solid #a3bd04\n}\n\n.wce-stat-num{\nfont-size:29px;\nfont-weight:800;\ncolor:#fff;\nline-height:1;\nwhite-space:nowrap\n}\n\n.wce-stat-lab{\nfont-size:11px;\ntext-transform:uppercase;\nletter-spacing:.06em;\nmargin-top:9px;\ncolor:#c8a24a\n}\n\n.wce-important-notice{\nbackground:#f6f6f7;\nborder:1px solid #c8a24a;\nborder-left:5px solid #c8a24a;\npadding:18px 20px;\nborder-radius:14px;\nmargin:18px 0 0;\ncolor:#300b05;\nfont-size:14px\n}\n\n.wce-highlight-box{\nbackground:#fff;\nborder:1px solid #a3bd04;\nborder-left:5px solid #a3bd04;\npadding:18px 20px;\nborder-radius:14px;\nmargin-top:18px\n}\n\n.wce-highlight-box h3{\nmargin-top:0\n}\n\n.wce-ai-summary,\n.wce-comparison,\n.wce-performance,\n.wce-charge-reference,\n.wce-resources{\nbackground:#d4e29b;\nborder:1px solid #a3bd04!important;\nborder-radius:18px;\nmargin:18px 0\n}\n\n.wce-not-recommended,\n.wce-selection-notice{\nbackground:#fff;\nborder:1px solid #e4e4e5!important;\nborder-left:5px solid #c8a24a!important;\nborder-radius:16px;\nmargin:18px 0\n}\n\n.wce-table-wrap{\nwidth:100%;\noverflow-x:auto;\nborder-radius:14px;\nborder:1px solid #e4e4e5;\nmargin:16px 0 4px\n}\n\n.wce-product-page table{\nwidth:100%;\nborder-collapse:collapse;\nbackground:#fff\n}\n\n.wce-product-page thead th{\nbackground:#300b05;\ncolor:#fff;\ntext-align:left;\nfont-size:12px;\nletter-spacing:.04em;\ntext-transform:uppercase;\npadding:14px 18px\n}\n\n.wce-product-page tbody th,\n.wce-product-page td{\npadding:14px 18px;\nborder-bottom:1px solid #e4e4e5;\nfont-size:14px;\nvertical-align:top;\ntext-align:left\n}\n\n.wce-product-page tbody th{\ncolor:#300b05;\nwidth:36%;\nfont-weight:700;\nborder-right:1px solid #e4e4e5\n}\n\n.wce-product-page tbody tr:nth-child(odd){\nbackground:#f6f6f7\n}\n\n.wce-product-page tr:last-child td,\n.wce-product-page tr:last-child th{\nborder-bottom:none\n}\n\n.wce-features h3,\n.wce-airflow-guide h3,\n.wce-cellar-requirements h3,\n.wce-buying-guide h3,\n.wce-included h3{\npadding-left:14px;\nborder-left:4px solid #a3bd04\n}\n\n.wce-product-page ul{\nmargin:10px 0 16px;\npadding-left:22px\n}\n\n.wce-product-page li{\nmargin:7px 0\n}\n\n.wce-resources ul{\nlist-style:none;\npadding:0;\nmargin:18px 0 0;\ndisplay:grid;\ngrid-template-columns:1fr 1fr;\ngap:10px\n}\n\n.wce-resources li{\nmargin:0\n}\n\n.wce-resources a{\ndisplay:flex;\nalign-items:center;\nmin-height:58px;\nbackground:#fff;\nborder:1px solid #e4e4e5;\nborder-radius:10px;\npadding:13px 16px;\ncolor:#300b05;\ntext-decoration:none;\nfont-weight:700;\nfont-size:14px\n}\n\n.wce-resources a:before{\ncontent:\"↓\";\ndisplay:inline-flex;\nalign-items:center;\njustify-content:center;\nwidth:34px;\nheight:34px;\nmargin-right:12px;\nborder-radius:9px;\nbackground:#300b05;\ncolor:#c8a24a;\nfont-size:18px;\nflex:none\n}\n\n.wce-faq-item{\nbackground:#fff;\nborder:1px solid #e4e4e5;\nborder-radius:14px;\nmargin-bottom:10px;\noverflow:hidden\n}\n\n.wce-faq-item summary{\ncursor:pointer;\nlist-style:none;\npadding:16px 52px 16px 20px;\nfont-weight:700;\ncolor:#300b05;\nposition:relative;\nbackground:#f6f6f7\n}\n\n.wce-faq-item summary::-webkit-details-marker{\ndisplay:none\n}\n\n.wce-faq-item summary:after{\ncontent:\"+\";\nposition:absolute;\nright:18px;\ntop:50%;\ntransform:translateY(-50%);\nwidth:26px;\nheight:26px;\nline-height:26px;\ntext-align:center;\nborder-radius:50%;\nbackground:#300b05;\ncolor:#fff\n}\n\n.wce-faq-item[open] summary{\nbackground:#300b05;\ncolor:#fff\n}\n\n.wce-faq-item[open] summary:after{\ncontent:\"−\";\nbackground:#c8a24a;\ncolor:#300b05\n}\n\n.wce-faq-body{\npadding:16px 20px\n}\n\n.wce-faq-body p{\nmargin:0\n}\n\n.wce-final-guidance{\nbackground:#300b05!important;\ncolor:#fff;\nborder-radius:18px;\nmargin:18px 0 0;\nposition:relative;\noverflow:hidden;\ntext-align:center;\npadding:42px!important\n}\n\n.wce-final-guidance:before{\ncontent:\"\";\nposition:absolute;\nleft:0;\ntop:0;\nwidth:100%;\nheight:6px;\nbackground:linear-gradient(90deg,#c8a24a,#a3bd04,#c8a24a)\n}\n\n.wce-final-guidance .wce-eyebrow{\nbackground:#c8a24a;\ncolor:#300b05\n}\n\n.wce-final-guidance h2{\ncolor:#fff\n}\n\n.wce-final-guidance p{\ncolor:#e8cf93;\nmax-width:820px;\nmargin:0 auto 14px\n}\n\n.wce-product-page a{\ncolor:#5a1a0e\n}\n\n.wce-product-page strong{\ncolor:#300b05\n}\n\n@media(max-width:860px){\n.wce-stats{\ngrid-template-columns:1fr 1fr\n}\n\n.wce-resources ul{\ngrid-template-columns:1fr\n}\n\n.wce-product-page\u003esection,\n.wce-product-header{\npadding:28px 22px\n}\n}\n\n@media(max-width:560px){\n.wce-stats{\ngrid-template-columns:1fr\n}\n\n.wce-product-page h1{\nfont-size:27px\n}\n\n.wce-product-page h2{\nfont-size:24px\n}\n\n.wce-product-page tbody th,\n.wce-product-page td{\npadding:12px 13px\n}\n\n.wce-final-guidance{\npadding:34px 20px!important\n}\n}\n\u003c\/style\u003e","brand":"WhisperKOOL","offers":[{"title":"Default Title","offer_id":52129070285020,"sku":"S-WKBT-MINI-OMEGA","price":6625.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0061\/3318\/6660\/files\/whisperkool-mini-blow-through-omega-110v-h-e-split-wine-cellar-cooling-system-s-wkbt-mini-omega-wine-cellar-units-s-wkbt-mini-omega-wine-coolers-empire-1251496335.webp?v=1785349689","url":"https:\/\/winecoolersempire.com\/products\/whisperkool-mini-blow-through-omega-110v-he-split-wine-cellar-cooling-system","provider":"Wine Coolers Empire","version":"1.0","type":"link"}