Kegco 24" Wide Cold Brew Coffee Single Tap All Stainless Steel Kegerator ICXCK-1S-1

• Includes a brand new 15 cu. ft. Aluminum Nitrogen Tank with Sleek Black Epoxy Finish
  This tank is produced from high strength, corrosion-resistant aluminum alloy 6061-T6. The eye-catching sleek black epoxy finish acts as an extra layer of protection against corrosion and wear, and the aluminum construction is lighter weight than steel tanks and does not rust. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with required U.S. Department of Transportation and Transport Canada Markings. The 580 Valves are CGA approved, and have a female thread for Nitrogen Regulators. (5.5" diameter, 18.25" Height).
• Includes a Dual Gauge Nitrogen Regulator
  This commercial grade dual gauge regulator is compatible with nitrogen cylinders with CGA 580 valves and features a double gauge design that measures both PSI and the volume of nitrogen gas in the tank. The durable regulator body is constructed of forged brass with all brass connections and components, an integral safety pressure relief valve that releases at 45 PSI, and a shut-off valve that allows you to instantly shut off pressure to the keg. A large pressure adjustment knob makes it easy to adjust the pressure by hand without requiring a screwdriver.
• Includes 5 feet of 5/16" I.D. Air Line Assembly with 2 Snap Clamps
  Standard 5 foot length of 5/16" I.D. Blur Air/Nitrogen tubing made of thermoplastic vinyl hose (Super Vinyl). This tubing will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two plastic snap clamps with a reusable clamp design.
• Includes Ball Lock Home Brew Keg Couplers
  This set includes both a gas in and beer out coupler that works with ball lock Cornelius Pepsi kegs. The gas in features a 1/4" thread for a flare fitting. This connector already has attached the special 1/4" nut that has a 5/16" hose barb attached. The couplers are made of food grade plastic which will not corrode. There is an option to upgrade to all stainless steel ball lock couplers.
• Includes a 3" diameter Stainless Steel Draft Tower
  The tower is a commercial grade single column, single faucet, 3" diameter stainless steel draft tower with 100% stainless steel contact. The stainless steel contact is necessary for good sanitation. This tower comes complete with a stainless steel faucet and 5 feet of 3/16" I.D. clear tubing. This tower is mounted using the gasket and four screws that are included. The faucet can be upgraded to a Perlick faucet, which has less internal surface area and prevents the faucet knob from sticking.
• Keg Storage Capacities:
• One (1) Full Size / 1/2-Barrel (15.5 Gal.)
• One (1) Pony Size / 1/4-Barrel Short (7.75 Gal.)
• Two (2) 1/4-Barrel Slim (7.75 Gal.) or
• Four (4) 1/6-Barrel (5.25 Gal.)
• Maximum Ambient Temperature: 90 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.
• Continuous cold air channeled through tower to ensure cold product
• Heavy-duty stainless steel top
• Built-in drip tray with drain
• Stainless steel interior walls and ceiling
• Rubber Floor Mat prevents damage to interior
• Magnetic gasket provides positive door sealing
• Self-closing door with lock
• Refrigeration system utilizes ozone friendly R134a refrigerant
• CFC-free foamed-in-place Polyurethane insulation
• Knockout for remote Nitrogen tank
• Stainless steel finish

Keg Configurations:

Some configurations require external Nitrogen tank mount.