Kegco 24" Wide Dual Tap Black Home Brew Kegerator HBK1XB-2

Kegco 24" Wide Dual Tap Black Kegerator HBK1XB-2 Review

The Kegco HBK1XB-2 Dual Faucet Home Brew Kegerator is ruggedly built to withstand constant use in busy commercial environments and provide consistent and reliable use in less demanding locations like your home. This keg dispenser comes complete with a draft system that can dispense from two ball lock kegs, allowing you to dispense a combination of beer, wine, soda and even cold brewed coffee or kombucha. The pre-configured kit takes the guesswork out of deciding which components to buy to dispense from Cornelius kegs and features $37 worth of upgrades at no additional cost.

1. Blower Hose for Air-Cooled Tower

   Keep the beer line cooled all the way up to the back of the faucet

2. Fan-Forced Cooling

   An interior fan provides rapid cool down and ensures consistent temperatures

3. Internal Thermometer

   Quickly and accurately monitor the internal temperature at a glance

4. Knockout for external CO₂ Tank or Drain Hose

   This knockout allows you to mount your CO₂ Tank outside the cabinet or direct the drip tray runoff to an external drain

5. Drip Tray Drain Receptacle

   Any spills from the faucet can be directed into this bottle for quick and easy cleaning

6. Steel Walls

   Behind these walls lies foamed in place polyurethane insulation to maintain a specific steady temperature

7. Rubber Floor Mat

   A rubber floor mat reduces the shock of heavy kegs on the stainless steel floor

4" locking casters make this beer dispenser easy to move, while the built-in drip tray and steel interior make it easy to clean. A 1/7 hp compressor provides cooling and cool air is fan-forced into the tower to ensure your beer is cold all the way up to the faucet. It comes with an air-cooled 3" diameter draft tower, so if your direct draw will be provided by your beer distributor, you're all set. Beverage Factory offers the ability to add a custom draft system with our top quality selection of regulators, couplers and fittings. See the available options below and feel free to contact our expert staff with any questions you may have.

WARNING: This product can expose you to chemicals including styrene, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.

FEATURES

• Includes a brand new 5 lb. Aluminum CO₂ Tank with Electric Red Epoxy Finish
  This tank is produced from high strength aluminum alloy 6061-T6, a highly corrosion-resistant material. It features an eye-catching glossy powder coated epoxy finish in Electric Red that acts as an extra layer of protection against corrosion and wear. The service pressure is up to 1800 PSI/124 BAR with a test pressure of 3000 PSI/207 BAR. These cylinders are stamped with the required U.S. Department of Transportation and Transport Canada Markings. The 320 Valves are CGA approved, and have a male thread for Co2 Regulators. An average fill is good for 5-6 kegs depending upon your fill.
• Includes 2 Product Commercial Grade Double Gauge CO₂ Regulator
  This regulator works with any CO₂ tank with a CGA-320 valve. The top gauge measures PSI, indicating how much CO₂ pressure is inside of the keg. The side gauge measures the remaining volume of CO₂ in the tank, so you'll know when it's about time to get the tank filled. This regulator features a T-style adjustment valve that can be adjusted by hand, eliminating the need for a screwdriver. A CO₂ splitter with two shut-off valves allows you to pressurize two kegs at once and shut off a line that you are not using.
• Includes two 5 foot, 5/16 Inch I.D. Blue Air Line Assemblies with Worm Drive Clamps
  This 5 foot length of 5/16" I.D. Blue Air/CO₂ Tubing is made of Thermoplastic Vinyl Hose (Super Vinyl). It will not rot, swell, or dry out, and is unaffected by normal cleaning compounds. This air line assembly comes with two durable stainless steel worm drive clamps that can be easily installed or removed with a flat head screwdriver.
• Includes Two Complete Sets of Ball Lock Home Brew Keg Taps
  The complete ball lock home brew keg tap set includes both a gas in and beer out coupler for easy tapping of ball lock Cornelius Pepsi kegs. The gas in has a 1/4" nut and 5/16" hose barb already attached for easy connection to the air line. The beer out connector has a 3/16" hose barb that connects to the 3/16" beer line.
• Includes a 3" Diameter Polished Stainless Steel Dual Faucet Draft Tower
  This NSF-approved tower is a 3" diameter double faucet metal draft tower made of polished stainless steel. It comes complete with two chrome plated faucets with brass levers and two 5 foot, 3/16 inch I.D. clear beer lines. This tower is mounted using the gasket and four screws that are included.
• All dispensing accessories are UL recognized components
• Continuous Cold Air Channeled Through Tower to Ensure Cold Product
• Heavy-Duty Stainless Steel Top
• Built-In Drip Tray with Drain
• Stainless Steel Interior Walls and Ceiling
• Rubber Floor Mat prevents damage to interior
• Magnetic Gasket Provides Positive Door Sealing
• Self-Closing Door with Lock
• Refrigeration System Utilizes Ozone Friendly R134a Refrigerant
• CFC-Free Foamed-in-Placed Polyurethane Insulation
• Knockout for Remote CO₂ or Nitrogen Tank
• Black Finish
• ETL and ETL Sanitation Listed for Commercial Use
• Maximum Ambient Temperature: 90 degrees Fahrenheit
• Minimum Ambient Temperature: The lowest temperature you want to store your kegs at. The unit does not have a heater, so if the ambient temperature is lower than the set temperature, the internal temperature will match the external temperature.