Our specialists review your room layout, insulation, and heat load to recommend the correct cooling system for stable temperature and reliable climate control.
FREE SHIPPING in the Continental US on most orders
Wine Guardian CS025 Wine Wall Cooling System - Base Model / Base Model
is backordered and will ship as soon as it is back in stock.
Call Us At (800) 407-7770 Or Chat Now To UNLOCK THE BEST PRICE AVAILABLE!
Options:
*Extreme Climate Protection Bundle
For Self-Contained Ducted systems: Contains an integral compressor crankcase heater and controls to protect the system against low temperatures (required when inlet air to the condenser coil is below 40°F/5°C). The bundle also contains an integral high capacity condenser fan and coil for operation at elevated ambient temperatures. This bundle should be considered when inlet air to the condenser coil is above 100°F/38°C (condenser air inlet cannot exceed 120°F/49°C).
For Ducted Split systems: Unit protection in extreme climate conditions (on the condenser section only). It is required for continuous operation in climates that fall below 20°F. Enables the system to operate in temperatures as low as -20°F.
Wine Guardian CS025 Wine Wall Cooling System
Fan-coil Options:Base Model, Condenser Options:Base Model
Wine Guardian CS025 Wine Wall Cooling System - Base Model / Base Model
is backordered and will ship as soon as it is back in stock.
In Stock & Ready to Ship
Estimated Delivery in 3-7 business days
Wine Guardian Wine Wall Cooling System
Wine Guardian CS025 Wine Wall Cooling System
The Wine Guardian CS025 Wine Wall Cooling System is a 60Hz ductless split wine wall cooling system designed for luxury wine walls, glass wine displays, compact wine rooms, and small wine cellar projects where visible cooling equipment needs to be minimized. With cooling capacity up to 2,900 BTU/h and a recommended application range of 100 to 1,200 cubic feet, the CS025 provides precise wine storage climate control while preserving the clean appearance of the wine display.
Designed for wine walls, glass wine rooms, and small wine cellar displays
Recommended for wine storage spaces from 100 to 1,200 cu. ft.
Ductless split configuration with remote outdoor condenser
Flush-mounted design helps keep bulky equipment out of view
Suitable for long-term wine storage and serving-temperature applications
60Hz system commonly used in North America, including the USA and Canada
Wine Guardian CS025 Quick Specifications
Model
CS025
System Type
Ductless split wine wall cooling system
Line Frequency
60Hz
Cooling Capacity
Up to 2,900 BTU/h
Listed Capacity Range
400 – 2,755 BTU
Recommended Volume
100 – 1,200 cu. ft.
Installation Type
Wine wall / ceiling-mounted evaporator with remote outdoor condenser
Ductwork Required
No ductwork required
Best Application
Wine walls, glass wine displays, small wine rooms, and wine cabinet projects
Temperature Use
Long-term wine storage and serving-temperature applications
Product Overview
The Wine Guardian CS025 is built for wine display projects where reliable climate control is required, but the cooling system should not dominate the visual design. It is especially useful for modern wine wall installations, glass-enclosed wine displays, compact home wine rooms, and premium residential wine storage spaces.
As a ductless split wine conditioning system, the CS025 uses an evaporator mounted in the wine wall or ceiling area and a remote outdoor condenser. This design helps reduce visible equipment inside the wine space and eliminates the need for ductwork. The unit is engineered to help maintain the ideal wine cellar temperature for storage, typically around 55°F to 58°F, while also supporting serving-temperature applications.
The CS025 is a strong option for small wine cellars, small to medium wine rooms, wine cabinets, and display-focused wine storage projects between 100 and 1,200 cubic feet.
Best For
Luxury residential wine walls
Glass wine displays and all-glass wine rooms
Small wine rooms from 100 to 1,200 cu. ft.
Modern wine storage displays where visible equipment should be minimized
Homeowners creating a premium wine presentation area
Interior designers planning wine wall features
Custom builders working on residential wine cellar projects
Projects where ductwork is not practical
Not Recommended For
Wine rooms larger than 1,200 cu. ft.
Large commercial wine storage applications
Multi-room wine cellar cooling projects requiring separate temperature zones
Installations where a ducted airflow system is preferred
Projects without a suitable outdoor condenser location
Projects where professional HVAC or refrigeration installation is not available
WCE Expert Recommendation: We recommend the Wine Guardian CS025 for homeowners, designers, and builders who need a discreet wine wall cooling system for compact wine displays. It is best suited for projects where visual integration, stable wine storage temperature, and ductless installation flexibility are all important.
The Wine Guardian CS025 is a ductless split wine cooling system and should be installed by a qualified HVAC or refrigeration professional. Proper sizing, line-set routing, electrical setup, condenser placement, and service access are essential for long-term performance.
Installation Considerations
Professional HVAC or refrigeration installation is recommended
Remote outdoor condensing unit placement is required
Evaporator and condenser are connected by copper tubing
Electrical requirements should be verified before installation
Service access should be maintained around the grille and condenser
Confirm total cubic footage before selecting the model
Account for glass walls, lighting, doors, and nearby ambient temperatures
Review the CAD drawings and manual before rough-in
Confirm outdoor condenser location and climate exposure
Use professional wine cellar design guidance for complex layouts
Not sure whether this model is properly sized for your project? Contact Wine Coolers Empire before ordering for free wine cellar design assistance.
Key Benefits
Hidden Wine Wall Cooling
The CS025 is designed for wine wall and ceiling-mounted applications where the cooling system should remain visually discreet.
Ductless Split Design
No ductwork is required, making this system suitable for projects with limited mechanical space or difficult duct routing.
Small to Mid-Size Fit
Intended for wine storage spaces from 100 to 1,200 cubic feet, depending on room construction and heat load.
Storage and Serving Temps
Supports standard wine storage temperatures and can also be used for serving-temperature applications.
Service-Friendly Access
The tool-free removable grille provides access to internal components and controls for qualified service professionals.
Durable Construction
Includes an all-aluminum chassis and grille, coated coils, and durable components designed for wine environments.
Limitations to Consider
It may be undersized for wine rooms larger than 1,200 cubic feet.
It requires a proper outdoor condenser location.
It does not replace proper wine room insulation, vapor barrier, and construction.
It may not be ideal for commercial-scale wine storage or high-traffic hospitality environments.
It should not be selected based on cubic footage alone; glass exposure, lighting, ambient heat, and room construction must be considered.
Advantages of Wine Guardian Ductless Split Systems
Wine Guardian ductless split wine cellar cooling units are designed for wine rooms where ductwork is not practical or where the cooling equipment needs to be separated from the wine display area. The CS025 places the evaporator in the wine wall or ceiling area and the condenser outdoors, helping reduce visible equipment while preserving stable wine storage conditions.
This configuration is useful for compact wine rooms, glass wine displays, and luxury residential projects where airflow, aesthetics, and serviceability all need to be considered.
The CS025 is the smaller Wine Guardian wine wall model and is typically the better fit for compact wine walls and smaller wine rooms. The CS050 is the larger option for projects requiring more capacity.
Feature
Wine Guardian CS025
Wine Guardian CS050
Best Use
Small wine walls and compact wine rooms
Larger wine walls and larger wine rooms
Recommended Volume
100 – 1,200 cu. ft.
250 – 2,200 cu. ft.
System Type
Ductless split wine wall cooling system
Ductless split wine wall cooling system
Design Priority
Hidden cooling for compact displays
Hidden cooling for larger displays
Best Buyer Fit
Homeowners, designers, and builders with smaller wine displays
Homeowners, designers, and builders with larger wine rooms
The ductless split design consists of two separate units and does not require ductwork.
Easy Access and Installation
The Wine Wall Cooling System and Ceiling Mounted System use a hinge design that helps support ceiling mounting and service access.
Remote System Control
The remote interface controller allows temperature adjustment and humidity monitoring.
Matched Condenser
The outdoor condensing unit is designed to work with the Wine Guardian evaporator.
Complete Wine Protection
The remote controller uses air-sensing technology to monitor wine cellar temperature and humidity.
Hassle-Free Service Access
The grille assembly can be removed without tools for easier service access.
Humidifier Compatible
An optional Wine Guardian Freestanding Humidifier may be added when additional humidity control is required.
Technical Specifications
Model
CS025
Line Frequency
60Hz
Capacity
400 – 2,755 BTU
Unit Capacity Note
Up to 2,900 BTU/h
Recommended Volume
100 – 1,200 ft³
Evaporator Length
44.19 in.
Condenser Length
34 in.
Evaporator Width
12.44 in.
Condenser Width
12.3 in.
Evaporator Height
11.43 in.
Condenser Height
26 in.
Evaporator Weight
43 lbs
Condenser Weight
75 lbs
Evaporator Electrical
115/1/60
Condenser Electrical
208-230/1/60
Ductless / Ducted
Ductless
Standard Condensing Option
The standard configuration includes Low Ambient Protection. This helps protect the system and supports operation in colder ambient temperatures. The CS025 is a 60Hz system commonly used in North America.
Extreme Climate Protection
Extreme Climate Protection protects the condenser section only in extreme climate conditions. It is intended for environments where temperatures may fall below 20°F and can support operation in temperatures as low as -20°F.
Accessories and Humidifier Options
Remote Interface Controller
Includes thermostat, humidistat, and monitor controls for flexible placement.
Remote Sensor
Detects temperature and humidity in the wine cellar for added sensing flexibility.
Communication Cable
Connects the Remote Interface Controller to the Wine Guardian cooling unit.
Freestanding Humidifier
Adds humidity control when the wine space needs additional cork and label protection.
Humidifier Wall Bracket
Supports flexible humidifier mounting for compatible wine cellar applications.
Warranty Information
Manufacturer Warranty
Wine Guardian warrants to the original buyer a period of two (2) years parts and one (1) year labor from the date of invoicing, assuming normal use and service.
Extended Compressor Warranty Option
The Wine Guardian 3 Year Extended Compressor Warranty extends the warranty period for the compressor, evaporator coil, and condenser coil parts by three (3) years.
Wine Coolers Empire helps homeowners, designers, builders, and hospitality professionals choose the right wine cooling equipment for their storage environment. We offer premium wine cellar refrigeration units, residential wine cellar coolers, commercial wine cellar cooling units, and wine room humidifiers.
More Wine Guardian reviews can be found on our Customer Reviews page. For order processing, shipping options, and delivery times, please visit our Shipping Policy.
Need Help Choosing the Right Wine Wall Cooling System?
The Wine Guardian CS025 is a strong fit for many compact wine wall and glass wine display projects, but proper sizing depends on room volume, insulation, glass exposure, lighting, ambient conditions, and condenser placement.
Talk to a Wine Coolers Empire specialist before ordering. Our team can help review your project and guide you toward the best-suited wine cooling system.
The CS025 is designed to cool wine walls and small wine rooms up to 650 cubic feet, provided the space is properly sealed and insulated.
The CS025 is part of Wine Guardian’s Wine Wall Series, engineered for shallow-depth enclosures. Its slim profile and ducted split configuration allow for discreet cooling of modern, glass-enclosed or wall-mounted wine displays.
Yes. The CS025 is a ducted split system, meaning the evaporator and condenser are separated and connected via refrigerant lines. This allows for flexible installation and helps keep noise and heat out of the display area.
Yes, the condenser can be installed outdoors when paired with the appropriate weather-rated condenser housing. It must be placed in a ventilated location protected from extreme weather.
Yes, installation must be completed by a licensed HVAC technician. Professional installation is necessary for safe refrigerant handling and to maintain the manufacturer’s warranty.
Yes, it is designed for ultra-quiet operation — a key feature for wine walls placed in living spaces, dining areas, or commercial display settings. The ducted setup allows noise-generating components to be installed remotely.
Wine Guardian offers a 2-year parts and labor warranty, with extended options available. The warranty is valid only if the unit is installed by a professional and properly registered."]
FAST, FREE SHIPPING
Get your online orders fast at your door with free shipping.
Was always tweaking my old system, trying to get the temp right. With this one? I set it once and haven’t touched it since. It just works, and I finally feel like my wine is being stored the way it should be.
M
Maria T.
Just buy it
Best decision ever. Powerful, silent, efficient, and reliable!
M
Marcus P.
Installation Was Easier Than I Expected
I was nervous about installing a cooling system, but this one was shockingly simple. The ceiling vent is discreet, and my contractor had it set up in just a few hours.
J
Justin G.
Blends Seamlessly
I did not want an ugly cooling system ruining the look. The CS025 is completely hidden, and I even painted the grille to match my ceiling. It looks amazing!
M
Matthew J.
Great Fit for Small Wine Displays
This unit is perfect for a small built-in wine wall. It keeps everything at the right temp without taking up space or making noise. Highly recommend!
G
Grace N.
Works Like a Charm!
Easy to use, and I love that it doesn’t draw too much energy.
T
Tom K.
Great Performance and Low Noise!"
The Wine Guardian CS025 is amazing at holding the temperature I want, and it’s very quiet, which I appreciate in my home.
A
Alison H.
Smooth Setup and Excellent Results!
My wine wall is kept cool, and I don’t even notice it’s running.
Wine Guardian
Wine Guardian CS025 Wine Wall Cooling System
Regular priceFrom$9,027.00
Unit price
Wine Guardian Wine Wall Cooling System
Wine Guardian CS025 Wine Wall Cooling System
The Wine Guardian CS025 Wine Wall Cooling System is a 60Hz ductless split wine wall cooling system designed for luxury wine walls, glass wine displays, compact wine rooms, and small wine cellar projects where visible cooling equipment needs to be minimized. With cooling capacity up to 2,900 BTU/h and a recommended application range of 100 to 1,200 cubic feet, the CS025 provides precise wine storage climate control while preserving the clean appearance of the wine display.
Designed for wine walls, glass wine rooms, and small wine cellar displays
Recommended for wine storage spaces from 100 to 1,200 cu. ft.
Ductless split configuration with remote outdoor condenser
Flush-mounted design helps keep bulky equipment out of view
Suitable for long-term wine storage and serving-temperature applications
60Hz system commonly used in North America, including the USA and Canada
Wine Guardian CS025 Quick Specifications
Model
CS025
System Type
Ductless split wine wall cooling system
Line Frequency
60Hz
Cooling Capacity
Up to 2,900 BTU/h
Listed Capacity Range
400 – 2,755 BTU
Recommended Volume
100 – 1,200 cu. ft.
Installation Type
Wine wall / ceiling-mounted evaporator with remote outdoor condenser
Ductwork Required
No ductwork required
Best Application
Wine walls, glass wine displays, small wine rooms, and wine cabinet projects
Temperature Use
Long-term wine storage and serving-temperature applications
Product Overview
The Wine Guardian CS025 is built for wine display projects where reliable climate control is required, but the cooling system should not dominate the visual design. It is especially useful for modern wine wall installations, glass-enclosed wine displays, compact home wine rooms, and premium residential wine storage spaces.
As a ductless split wine conditioning system, the CS025 uses an evaporator mounted in the wine wall or ceiling area and a remote outdoor condenser. This design helps reduce visible equipment inside the wine space and eliminates the need for ductwork. The unit is engineered to help maintain the ideal wine cellar temperature for storage, typically around 55°F to 58°F, while also supporting serving-temperature applications.
The CS025 is a strong option for small wine cellars, small to medium wine rooms, wine cabinets, and display-focused wine storage projects between 100 and 1,200 cubic feet.
Best For
Luxury residential wine walls
Glass wine displays and all-glass wine rooms
Small wine rooms from 100 to 1,200 cu. ft.
Modern wine storage displays where visible equipment should be minimized
Homeowners creating a premium wine presentation area
Interior designers planning wine wall features
Custom builders working on residential wine cellar projects
Projects where ductwork is not practical
Not Recommended For
Wine rooms larger than 1,200 cu. ft.
Large commercial wine storage applications
Multi-room wine cellar cooling projects requiring separate temperature zones
Installations where a ducted airflow system is preferred
Projects without a suitable outdoor condenser location
Projects where professional HVAC or refrigeration installation is not available
WCE Expert Recommendation: We recommend the Wine Guardian CS025 for homeowners, designers, and builders who need a discreet wine wall cooling system for compact wine displays. It is best suited for projects where visual integration, stable wine storage temperature, and ductless installation flexibility are all important.
The Wine Guardian CS025 is a ductless split wine cooling system and should be installed by a qualified HVAC or refrigeration professional. Proper sizing, line-set routing, electrical setup, condenser placement, and service access are essential for long-term performance.
Installation Considerations
Professional HVAC or refrigeration installation is recommended
Remote outdoor condensing unit placement is required
Evaporator and condenser are connected by copper tubing
Electrical requirements should be verified before installation
Service access should be maintained around the grille and condenser
Confirm total cubic footage before selecting the model
Account for glass walls, lighting, doors, and nearby ambient temperatures
Review the CAD drawings and manual before rough-in
Confirm outdoor condenser location and climate exposure
Use professional wine cellar design guidance for complex layouts
Not sure whether this model is properly sized for your project? Contact Wine Coolers Empire before ordering for free wine cellar design assistance.
Key Benefits
Hidden Wine Wall Cooling
The CS025 is designed for wine wall and ceiling-mounted applications where the cooling system should remain visually discreet.
Ductless Split Design
No ductwork is required, making this system suitable for projects with limited mechanical space or difficult duct routing.
Small to Mid-Size Fit
Intended for wine storage spaces from 100 to 1,200 cubic feet, depending on room construction and heat load.
Storage and Serving Temps
Supports standard wine storage temperatures and can also be used for serving-temperature applications.
Service-Friendly Access
The tool-free removable grille provides access to internal components and controls for qualified service professionals.
Durable Construction
Includes an all-aluminum chassis and grille, coated coils, and durable components designed for wine environments.
Limitations to Consider
It may be undersized for wine rooms larger than 1,200 cubic feet.
It requires a proper outdoor condenser location.
It does not replace proper wine room insulation, vapor barrier, and construction.
It may not be ideal for commercial-scale wine storage or high-traffic hospitality environments.
It should not be selected based on cubic footage alone; glass exposure, lighting, ambient heat, and room construction must be considered.
Advantages of Wine Guardian Ductless Split Systems
Wine Guardian ductless split wine cellar cooling units are designed for wine rooms where ductwork is not practical or where the cooling equipment needs to be separated from the wine display area. The CS025 places the evaporator in the wine wall or ceiling area and the condenser outdoors, helping reduce visible equipment while preserving stable wine storage conditions.
This configuration is useful for compact wine rooms, glass wine displays, and luxury residential projects where airflow, aesthetics, and serviceability all need to be considered.
The CS025 is the smaller Wine Guardian wine wall model and is typically the better fit for compact wine walls and smaller wine rooms. The CS050 is the larger option for projects requiring more capacity.
Feature
Wine Guardian CS025
Wine Guardian CS050
Best Use
Small wine walls and compact wine rooms
Larger wine walls and larger wine rooms
Recommended Volume
100 – 1,200 cu. ft.
250 – 2,200 cu. ft.
System Type
Ductless split wine wall cooling system
Ductless split wine wall cooling system
Design Priority
Hidden cooling for compact displays
Hidden cooling for larger displays
Best Buyer Fit
Homeowners, designers, and builders with smaller wine displays
Homeowners, designers, and builders with larger wine rooms
The ductless split design consists of two separate units and does not require ductwork.
Easy Access and Installation
The Wine Wall Cooling System and Ceiling Mounted System use a hinge design that helps support ceiling mounting and service access.
Remote System Control
The remote interface controller allows temperature adjustment and humidity monitoring.
Matched Condenser
The outdoor condensing unit is designed to work with the Wine Guardian evaporator.
Complete Wine Protection
The remote controller uses air-sensing technology to monitor wine cellar temperature and humidity.
Hassle-Free Service Access
The grille assembly can be removed without tools for easier service access.
Humidifier Compatible
An optional Wine Guardian Freestanding Humidifier may be added when additional humidity control is required.
Technical Specifications
Model
CS025
Line Frequency
60Hz
Capacity
400 – 2,755 BTU
Unit Capacity Note
Up to 2,900 BTU/h
Recommended Volume
100 – 1,200 ft³
Evaporator Length
44.19 in.
Condenser Length
34 in.
Evaporator Width
12.44 in.
Condenser Width
12.3 in.
Evaporator Height
11.43 in.
Condenser Height
26 in.
Evaporator Weight
43 lbs
Condenser Weight
75 lbs
Evaporator Electrical
115/1/60
Condenser Electrical
208-230/1/60
Ductless / Ducted
Ductless
Standard Condensing Option
The standard configuration includes Low Ambient Protection. This helps protect the system and supports operation in colder ambient temperatures. The CS025 is a 60Hz system commonly used in North America.
Extreme Climate Protection
Extreme Climate Protection protects the condenser section only in extreme climate conditions. It is intended for environments where temperatures may fall below 20°F and can support operation in temperatures as low as -20°F.
Accessories and Humidifier Options
Remote Interface Controller
Includes thermostat, humidistat, and monitor controls for flexible placement.
Remote Sensor
Detects temperature and humidity in the wine cellar for added sensing flexibility.
Communication Cable
Connects the Remote Interface Controller to the Wine Guardian cooling unit.
Freestanding Humidifier
Adds humidity control when the wine space needs additional cork and label protection.
Humidifier Wall Bracket
Supports flexible humidifier mounting for compatible wine cellar applications.
Warranty Information
Manufacturer Warranty
Wine Guardian warrants to the original buyer a period of two (2) years parts and one (1) year labor from the date of invoicing, assuming normal use and service.
Extended Compressor Warranty Option
The Wine Guardian 3 Year Extended Compressor Warranty extends the warranty period for the compressor, evaporator coil, and condenser coil parts by three (3) years.
Wine Coolers Empire helps homeowners, designers, builders, and hospitality professionals choose the right wine cooling equipment for their storage environment. We offer premium wine cellar refrigeration units, residential wine cellar coolers, commercial wine cellar cooling units, and wine room humidifiers.
More Wine Guardian reviews can be found on our Customer Reviews page. For order processing, shipping options, and delivery times, please visit our Shipping Policy.
Need Help Choosing the Right Wine Wall Cooling System?
The Wine Guardian CS025 is a strong fit for many compact wine wall and glass wine display projects, but proper sizing depends on room volume, insulation, glass exposure, lighting, ambient conditions, and condenser placement.
Talk to a Wine Coolers Empire specialist before ordering. Our team can help review your project and guide you toward the best-suited wine cooling system.
